Dual IP People Counting Camera

Properties
-2 x 1/2.8 "3 megapixel megapixel progressivee scan CMOS
-H. 265 & h.264 compression
-3MP resolution
-2 fixed 2.8 mm lenses
-WDR (120dB)
-IR night vision up to 10 meters
-Multiple network monitoring: Web viewer, CMS (DSS/PSS) & DMSS
-Micro SD storage up to 128 GB, PoE
-Persons count: 98% accurate
-IP67, wide voltage tolerance, 4KV Lightning protection

People counting
This camera uses deep learning: a form of artificial intelligence. This makes it possible to use the camera to count the number of people in a room: both the number of people within a specific area as the number of people crossing an imaginary line.

Suitable for outdoor use
This camera is IP67 classified. This means that the camera is dust-resistant and immersion proof. In addition, the camera has a 4KV lightning classification, which means that the camera is protected against lightning. Because of the voltage tolerance of 25%, the camera is even suitable for most unstable conditions with outdoor use.

Resolution
This security camera has a resolution of 3 megapixels with 2048 x 1536p.

SD card recording
Save a huge amount on costs for a loose NVR recorder, as an SD card from 128 GB is still much cheaper than a NVR recorder for a few hundred euros. How long you can record is really up to the settings and resolution, but you can with roughly 128 GB at least 3 days of non-stop recording. With recording on motion detection, of course, many times longer.

PoE
Power over Ethernet is nothing but image and power through one cable instead of 2 separate cables. Poe also often gives voltage (current) from the input of a PoE NVR recorder. You can also use a PoE injector.

ONVIF ready
A ONVIF camera is nothing more than an open protocol, with ONVIF can you this IP camera data on each NAS, or other NVR recorder that the ONVIF protocols.

Mounting
This camera can be mounted to the wall or ceiling. If you are somewhat technical you can do this yourself, but of course you can also use our installation service.