Do you have a security camera with UTC technique?
Use this UTC controller, to adjust a CCTV security camera.
This device is then placed between the recorder and the coaxial cable.
Now it is possible to setup the CCTV camera, without going to the CCTV camera itself!
Super useful if a security camera is placed at high altitude and not easy to change the settings.
Especially for our installers, surveillance cameras with UTC technology!
Just finished completing a CCTV surveillance camera project, but just forget to setup that one CCTV camera?
Working platform is already gone and you still need to adjust the settings of the security camera.
Once again using a scissor lift, or a long stair takes time and cost's money.
Now we sell security cameras, with UTC technology.
Install a security camera and connect it to the recorder.
If the image is not acceptable, for example by too much sunlight, than adjust it direct from the location were the DVR is placed.
Connect the UTC control to the coaxial cable, which is connected to the recorder and connect the UTC controller to the recorder.
You now have a coaxial telemetry application realized and now it's possible to make any OSD adjustment.
Repeat this for the other UTC surveillance cameras, if necessary.
1 UTC controller is sufficient for a mechanic, or a end user!
UTC means in full text "Up the Coax".
So this is actually a remote control for the OSD menu, of a surveillance camera, to make adjustments via coaxial cable.
This works only on surveillance cameras, which feature a UTC chip!