Flexible PoE switch with 9-Port

Flexible PoE switch with 9-Port

16 PoE switch with additional Gigabit Ports

16 PoE switch with additional Gigabit Ports

PoE switch with many ports

If you need to connect many devices, then this switch ideal!
This PoE switch has 16 ports. 
The gates are useful if, for example, you want to connect IP cameras.
Each port has its own power supply of 15.4 W. 
Data transmission can over the Cat5/Cat5e/Cat6 cable.

€435.00 Excl. BTW
Delivery within 3-7 days

This switch is fully compatible to devices that comply with the IEEE 802 .3af PoE standard. 
It's easy to add devices that have Wireless Access points (APS).
Thus, it is possible to IP cameras, VOIP phones, printers, and Network Attached Storage (NAS) to connect directly on one of the gates. 
It is not necessary to have an additional socket in the vicinity.

There is no configuration required and installation is quick and easy. 
Support for Auto-MDI/MDI-X on all ports and eliminates the need for cross-over connection for another switch or HUB.
The speed is intelligently adjusted so that the device looks for the most optimal performance.
PoE is very easy and will save up to 50% time and cost because there is no separate electrical wiring to be installed. 

The switch supports 10Mbps Ethernet or 100Mbps Fast Ethernet and runs in both half and full duplex mode using two pairs of category 5 or 5e cable.
All ports are Auto-MDI type. The switch can automatically convert to MDII or MDI-X type, so you can use the RJ-45 cable regardless of whether it is a standard or crossover cable. 

- 16 x 10/100Mbps Auto-negotiation Fast Ethernet RJ-45-ports met 16-ports PoE function (port 1 ~ 16-port)
- Complies with IEEE 802 .3af (AF version)

- Supports PoE consumption up to 300W (AF version) for all PoE ports.
- Supports PoE IEEE802.3af compliant Powered Device (PD)
- Each port supports auto MDI/MDIX, so there is no need to use cross-over cables.
- Full and half duplex transfer mode for each port.
- Receive and send
- 64KBytes packet buffer 

Standard IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3x Full Duplex Flow Control
IEEE 802.3af Power over Ethernet 
Protocol CSMA/CD
Data Transfer Rate Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex) 
Network Cables 10BASE-T: 2-pair UTP Cat 3, 4, 5 up to 100 meters.
100BASE-Tx: 2-pair UTP Cat 5, 5e up to 100 meters. 
Number of Ports 16 x 10/100Mbps auto-MDIX RJ-45 ports with 16 PoE enabled ports.
PoE power on RJ-45 Power +: ping 3 & ping 6 : Power –” ping 1 & ping 2
AC to DC power supply Input: 110V ~ 240VAC, 50Hz ~ 60Hz. Output: 48VDC / 6.25A
Power Consumption 8.0  watts ( max with no PD device connected)
300 watts (16 PoE ports 15.4W/port) 
Temperature Operation: 0℃ ~ 40 ℃  or 32℉ ~ 104 ℉
Storage Temperature: -10℃ ~ 70 ℃ or  14℉ ~ 158 ℉ 
Humidity Relative Humidity: 5% - 95%
Dimensions 430mm W x 266mm D x 66.4mm H
EMI FCC Class B, CE Mark Class B
Safety 110VAC to 240VAC power supply UL listed.
RAM buffer 64K bytes per device
Filtering Address Table 1K entries per device 
Packet Filtering Forwarding Rate 10Mbps Ethernet: 14,880/pps
100Mbps Ethernet: 148,800/pps 
MAC address Learning Automatic update
Transmission Method Store – and – Forward




More Information
Brand OEM
Warranty 3 year
Gigabit Port No
PoE Ports 16 Ports
Injectors N/A
Splitter N/A


(Size: 522.1 KB)
Write Your Own Review
You're reviewing:PoE switch with many ports
Your Rating