Switch with 16 ports.
All 16 ports can support PoE.
There are also 2 extra copper Gigabit ports.
These ports support 10/100Mbps specifically designed to increase employee performance groups.
This switch is fully compatible to devices that comply with the IEEE 802 .3af PoE standard.
It's easy to add devices that have Wireless Access points (APS).
Thus, it is possible to IP cameras, VOIP phones, printers, and Network Attached Storage (NAS) to connect directly on one of the gates.
It is not necessary to have an additional socket in the vicinity.
There is no configuration required and installation is quick and easy.
Support for Auto-MDI/MDI-X on all ports and eliminates the need for cross-over connection for another switch or HUB.
The speed is intelligently adjusted so that the device looks for the most optimal performance.
PoE is very easy and will save up to 50% time and cost because there is no separate electrical wiring to be installed.
The switch supports 10Mbps Ethernet or 100Mbps Fast Ethernet and runs in both half and full duplex mode using two pairs of category 5 or 5e cable.
All ports are Auto-MDI type. The switch can automatically convert to MDII or MDI-X type, so you can use the RJ-45 cable regardless of whether it is a standard or crossover cable.
- 16 x 10/100Mbps Auto-negotiation Fast Ethernet RJ-45-ports met 16-ports PoE function (port 1 ~ 16-port)
- 2 x 10/100/1000MBase_T copper RJ-45 ports + 2 x 10/100/1000MBase_T SFP ports
- Complies with IEEE 802 .3af.
- Supports PoE consumption up to 210W/340W for all PoE ports.
- Supports PoE IEEE 802 .3af compatible powered device (PD)
- Each port supports auto MDI/MDIX, so there is no need to use cross-over cables.
- Full and half duplex transfer mode for each port.
- Send and receive
-2.75Mb RAM packet buffer
|Standard||IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3x Full Duplex Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet (twisted-pair copper)
|Data Transfer Rate||Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex)
Gigabit Ethernet: 2000Mbps (full duplex)
|Network Cables||10Base-T: 2-pair UTP Cat 3, 4, 5 up to 100 meters.
100Base-T : 2-pair UTP Cat 5, 5e up to 100 meters.
1000Base-T: 4-pair UTP Cat5e 6, up to 100meters.
50/62.5um LC signal model or Multi model fiber cable.
|Number of Ports||16 x 10/100Mbps auto-MDIX RJ-45 ports with 16 PoE enabled ports.
2 x 10/100/1000Mbps RJ-45 ports.
2 x 10/100/1000Mbps SFP ports (option)
|PoE power on RJ-45||Power +: pin 3 & pin 6 : Power –” pin 1 & pin 2|
|Power Supply||Input: 100V ~ 240VAC, 50Hz ~ 60Hz. Output: 48VDC 7.3A(350W)|
|Power Consumption||10.0 watts ( max with no PD device connected)
340 watts (350W Power)
|Temperature||Operation: 0℃ ~ 40 ℃ or 32℉ ~ 104 ℉
Storage Temperature: -10℃ ~ 70 ℃ or 14℉ ~ 158 ℉
|Humidity||Relative Humidity: 5% - 95%|
|Dimensions||430mm W x 256mm D x 66.4mm H|
|EMI||FCC Class B, CE Mark Class B|
|Safety||110VAC to 240VAC power supply UL listed.|
|RAM buffer||2.75Mb bytes per device|
|Filtering Address Table||4K entries per device|
|Packet Filtering Forwarding Rate||10Mbps Ethernet: 14,880/pps
100Mbps Ethernet: 148,800/pps
1000MBase-T Ethernet: 1,488,000/pps.
|MAC address Learning||Automatic update|
|Transmission Method||Store – and – Forward|
|Gigabit Port||2 Ports|
|PoE Ports||16 Ports|